Investigation of the interaction between protein and europium doped polymer

The interactions between bovine serum albumin (BSA) and polymer (poly (METAC-co-NIPAm-co-Eu(AA)3Phen), PMNEu) containing rare earth element (Europium) were detailedly investigated by both of experimental techniques, such as fluorescence spectroscopic analysis, zeta-potential characterization, hydrodynamic size measurements and transmission electron microscopy (TEM) observation, and theoretical calculations. As a result, we concluded that PMNEu could interact with BSA through electrostatic force and quench the fluorescence of BSA, which was regarded as the static quenching mechanism. In addition, the binding constant and binding sites number of BSA with PMNEu were calculated, and the distance between PMNEu and BSA was also estimated to be 1.9?nm based on Föster’s theory. Furthermore, the two fluorescence peaks of PMNEu at 594?nm and 618?nm were detected, and the density of them increased with the more BSA being added to couple with PMNEu. Additionally, The zeta-potential results confirmed the electrostatic interaction mode between BSA and PMNEu, which was concluded with the previous thermodynamic analysis. At last, the results from the hydrodynamic size measurement had a good agreement with those from the TEM observation about the structure and size variation during the complexation of PMNEu with different concentrations of BSA.     

通过宽线固体核磁共振氢谱研究半晶高分子的相结构

宽线固体核磁共振氢谱（¹H NMR）是一种研究半晶高分子相结构的经典方法.本文以半晶聚乙烯的宽线固体¹H NMR谱为例，探讨了通过Gaussian/Sinc、Gaussian和Lorentzian函数组合对宽线固体¹H NMR谱图进行拟合的方案，并根据半晶聚乙烯的相结构成分对拟合得到的各信号成分进行归属.并在此基础上探讨了各个相结构中分子链运动与信号线型的相关性，以及利用宽线固体¹H NMR谱测量半晶高分子结晶度存在的困难.     

Thieno[3,2‐b]Thiophene End‐Capped all‐Sulfur Analog of 3,4‐Ethylenedioxythiophene and its Eletrosynthesized Polymer: Is Distorted Conformation Not Suitable for Electrochromism?

By employing planar thieno[3,2‐b]thiophene (TT) as end‐capped units and famous 3,4‐ethylenedioxythiophene (EDOT) or its all‐sulfur analog 3,4‐ethylenedithiathiophene (EDTT) as cores, two conjugated oligomer, TT‐EDOT‐TT and TT‐EDTT‐TT, have been synthesized and electropolymerized into electrochromic polymer films, P(TT‐EDOT‐TT) and P(TT‐EDTT‐TT), respectively. Due to strongly noncovalent inter/intramolecular interactions from S? S attraction of TT‐EDTT‐TT, it has twisted molecular configuration in contrast to planar TT‐EDOT‐TT. Spectroscopic, electrochemical, morphological as well as theoretical calculation studies of these oligomers or polymers were carried out to reveal the significant influence of such molecular geometry on their physicochemical and optoelectronic properties. According to electrochromic kinetics, P(TT‐EDTT‐TT) presented preferable electrochromic behavior such as the higher optical contrast (70.8%), favorable coloration efficiency (331.3 cm² C^?1) and fast response time (0.72 s). This research will help us deeply understand the effect of spatial organization of precursor molecules on the properties of electrochromic polymers and provides a promising strategy to develop high‐performance electrochromic materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1041–1048     

Interaction between the end groups and the main chain of conjugated polymers by time-resolved EPR and fluorescence spectroscopy

ABSTRACT

Interaction between a zinc porphyrin (ZnPor) as the end-group and poly(9,9-di-n-octylfluorene-2,7-vinylene) (PFV) as the main chain in a porphyrin end-modified fluorescent conjugated polymer, ZnPFV, was studied by time-resolved electron paramagnetic resonance (EPR) and fluorescence spectroscopy. While fluorescence from the PFV part of ZnPFV showed a spectral profile almost identical to that of a PFV oligomer without end-modification, the emission spectrum of the ZnPor part exhibited a much broader profile compared to that of the reference zinc porphyrin monomer. Based on the analysis of lifetimes and quantum yields, it was found that radiative rate constant of the ZnPor part was enhanced by nearly three times. The observed unusual enhancement in the radiative rate constant was rationalised in terms of a partial π-conjugation between the end group and the main chain, as a result of co-planarisation in fluid solution. On the other hand, the time-resolved EPR spectrum of ZnPFV at 100?K basically showed a similar spectral pattern to that of the reference zinc porphyrin, but with significant differences in zero-field spitting parameters and initial population ratios. The π-system of the excited triplet state is deduced to deviate from D_4h symmetry in the end zinc porphyrin groups. The obtained results show that interaction of the porphyrin end group with the main chain of the polymer significantly influences the excited singlet state properties of the porphyrin, while its triplet state properties were affected to a lesser extent.     

Functional Zwitterionic Polymers on Surface: Structures and Applications

Zwitterionic polymers are important in a wide range of industrial, biological and medical fields. Their chemical structures include an equal amount of anion and cation groups, and such structures give rise to many unique functionalities, such as temperature response, anti‐polyelectrolyte effect, and strong hydration properties. In this review, we focus on the structures and applications of functional zwitterionic polymers on surfaces. We review three areas of applications according to the architecture of the polymeric systems: surface coating, complex solutions, and hydrogel. We review the simulation and theory work and highlight some outlooks for further development.     

Numerical Simulation of the Distribution Function and Free Energy of a Single Wormlike Polymer Confined between Hard Walls

We focus on the distribution and free energy of a wormlike polymer confined between two parallel hard walls.The variation in the distribution and free energy of the wormlike chain as the spacing between the walls decreases(or as the total contour length of the wormlike chain increases or as the persistence length of the chain increases)is simulated.The main reason for these changes is a degradation of the long wormlike chain into a Gaussian long chain under weak confinement.     

Synthesis and characterization of novel ferrocenyl glycidyl ether polymer,ferrocenyl poly (epichlorohydrin) and ferrocenyl poly (glycidyl azide)

Poly (ferrocenyl glycidyl ether) was synthesized by polymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane (FcEpo) using toluene solution of methylaluminoxane as the catalyst. Copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin was used for the synthesis of another ferrocenyl based poly (epichlorohydrin). Ferrocenyl based poly (glycidyl azide), GAP, was synthesized by treatment of sodium azide with this copolymer in DMF as solvent at room temperature. The synthesized ferrocenyl based polymers were characterized by FT-IR, ¹HNMR, UV–Vis, TGA, DSC and GPC analysis. The UV–Vis spectra of synthesized polymers show the absorption band of ferrocene moiety at about 450 nm. The TGA and DSC analysis show that poly (ferrocenyl glycidyl ether) has good thermal stability. The TGA analysis shows that the copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin improved the thermal stability of the copolymer. The GPC analysis of poly (ferrocenyl glycidyl ether), ferrocenyl based poly (epichlorohydrin) and Ferrocenyl based poly (glycidyl azide) show the PDI between 1.14–1.17. The electrochemical behavior of synthesized polymers was investigated by cyclic voltammetry (CV) measurements. The CV curves of synthesized polymers show good electrochemical performance and there is one redox system with the single-electron reversible reaction that associated with ferrocene moiety in polymers structure. The anodic and cathodic peak currents increased with scan rate confirmed redox reactions in the system are kinetically fast diffusion-controlled reactions.     

Ultrasound-assisted nanoscaled supramolecular coordination polymer as an efficient recyclable catalyst for photocatalytic degradation of dye pollutants

An ultrasound-assisted nanoscaled supramolecular coordination polymer (nanosized 1′ ) has been synthesized using a self-assembly reaction of K₃[Cu (CN)₄] and hexamethylenetetramine in the presence of Me₃SnCl under ambient conditions. Nanosized 1′ was examined using elemental analysis, Fourier transform–infrared, transmission electron microscopy, scanning electron microscopy and X-ray powder diffractions. It was structurally compared with the single crystal supramolecular coordination polymer ^∞₃[Cu₆(CN)₇(C₆H₁₂N₄)₂(OH₃)]; SCP 1. The photocatalytic activities of nanosized 1′ and SCP 1 toward different hazardous organic dyes were determined under ambient, UV-light irradiation and ultrasonic conditions. SCP 1 and nanosized 1′ as heterogeneous nanoparticles catalysts exhibited high catalytic activity for degradation of Congo Red, Methyl Violet 2B and Methylene Blue dyes. The effects of operational parameters on catalytic degradation process, identification of the degradation products and recycling of the catalyst were also investigated. SCP 1 and nanosized 1′ are recyclable heterogeneous catalysts and can be reused with efficient activities. The mechanism of degradation using different scavenger techniques iss proposed and discussed. The catalytic oxidation process is mainly caused by ^•OH radicals.     

Zwitterionic Block Copolymers for the Synthesis and Stabilization of Perovskite Nanocrystals

Traditional hot injection methods for the preparation of cesium lead halide perovskite nanocrystals (CsPbX₃ PNCs, where X=Cl, Br, or I) rely on small molecule surfactants to produce PNCs with cube, plate, or rod-like morphologies. Here, we describe a new method whereby zwitterionic block copolymers are employed as macromolecular ligands in PNC synthesis, affording PNCs with excellent colloidal stability, high photoluminescence quantum yield, and in some cases distinctly non-cubic shapes. The block copolymers used in this study – composed of a poly(n-butyl methacrylate) hydrophobic block and zwitterionic methacrylate hydrophilic blocks – dissolve in useful solvents for PNC growth despite containing large mole percentages of zwitterionic groups. PNCs prepared with block copolymer ligands were found to disperse and retain their fluorescence in a range of polar organic solvents and were amenable to direct integration into optically transparent nanocomposite thin films with high PNC content.     

Luminescent lanthanide coordination polymers with transformative energy transfer processes for physical and chemical sensing applications

The photophysical process of lanthanide(III) ion is based on the 4f-4f transition, which is the Laporte forbidden with narrow emission band and long emission lifetime. The 4f-4f emission process is affected by introducing aromatic organic ligands. In this review, recent progress of one-, two-, and three-dimensional polymer-typed lanthanide complexes, luminescent lanthanide coordination polymers, are focused for physical and chemical sensing applications. Their changeable luminescence depended on the physical and chemical environments come from the energy transfer between lanthanide(III) ions and aromatic organic ligands. The characteristic physical (temperature, pressure, pH and mechanical force) and chemical (adsorption of metal ions and molecules) sensitive luminescence of lanthanide coordination polymers are useful for future sensing applications.